ABS-R Filament Profile

Loading ABS-R filament

1. Click 3D Ink button and enter ABS for the filament profile type

2. Select any filament color

3. After the following the prompts and filament is loaded, click the little gear button in the filament pop up window to access the temperature setting

4. Change the filament temperature to 245C if it is not already selected

5. Click save and exit the filament pop up window

 

Print settings for ABS-R

Quality: Low (we recommend starting with low quality first) 

Infill: Low to Medium

Raft: Not needed unless part has very large bottom layer

Supports: Not needed (try without support material as ABS-R does well with overhangs)

 

Notes

If warping occurs on first layer, try using a higher printing temperature by 5 to 10 degrees